212 of 285
Link Quality Analysis (LQA) Decay Rate
This option sets the artificial decay rate for the link quality information that is stored
in the link quality table within the ALE processor.
Switching the sounding off and setting a decay rate of two hours would result in the
recording of a perfect channel (100% channel quality) decaying to an unusable
channel (0% channel quality) over a period of two hours.
The decay rate can be disabled, set to 1,2,4,8,24 and 48 hours.
Use the Scroll keys to select the decay time or disable (example
“8 hours”):-
When the setting required is selected press the key
To Next Page
Loading...
