41 of 285
Receiving Allcalls, Group Calls and Sub-group Calls
Stations can send a Selective Call that will alert different groupings of mobiles as
follows:-
In four digit format
Allcall A station sending X000 will be received by stations X000 - X999
(up to 890 stations*)
Group call A station sending XX00 will be received by stations XX00 - XX99
(up to 89 stations*)
Sub-group call A station sending XXX0 will be received by stations XXX0 - XXX9
(up to 9 stations*)
In six digit format
Allcall A station sending XXX000 will be received by stations XXX000 -
XXX999 (up to 890 stations*)
Group call A station sending XXXX00 will be received by stations XXXX00 -
XXXX99 (up to 89 stations*)
Sub-group call A station sending XXXXX0 will be received by stations XXXXX0 -
XXXXX9 (up to 9 stations*)
* If using the group call system, stations cannot be programmed to have self IDs
with last digits 000,00,0 as if you tried to call them a group call would occur.
Note:- Allcall, group call or sub-group call must be enabled, during programming,
on a destination station for group calling to operate
To Next Page
Loading...
