221 of 285
Cloning (Programming) from Another Transceiver
Note:- Use the transceiver you want to send the configuration from for the
following steps
This feature is used to send a copy of the configuration of one 2050 transceiver or
2050 transceiver fitted in the manpack adaptor to another using a cable (Barrett P/N
BCA90024 or BCA204020) connecting both transceivers together via their auxiliary
connectors using the RS-232 connection.
Before uploading commences it is necessary to enter the Selcall IDs of the
transceiver that will be loaded.
press the key
Using the numeric keypad enter Self ID 1 and press the
key
Using the numeric keypad enter Self ID 2 and press the
key
To Next Page
Loading...
