9400200990 Rev I DGC-2020 LSM-2020 (Load Share Module) 8-5
Device Security Setup
Password protection guards against unauthorized changing of LSM-2020 communication settings.
Passwords are case sensitive. OEM Access is the only level of password protection available. This
password level allows access to all settings made using the LSM-2020 plugin for BESTCOMSPlus. The
default, OEM-access password is OEM.
Passwords can be changed only after communication between the PC and LSM-2020 is established. A
change to the password is made through the Device Security Setup screen. Use the Settings Explorer in
BESTCOMSPlus to open the General Settings, Device Security Setup screen. See
Figure 8-2.
A password i
s changed by clicking on the access level
A
, entering the new password
B
, and then clicking
on the Save Password button
C
.
Figure 8-2. Device Security Setup Screen
A
Access Level/Password: Read-only value obtained when BESTCOMSPlus is communicating with the
Load Share Module.
B
Password: Accepts an alphanumeric character string of up to 16 characters.
C
Save Password: Clicking this button will save the password changes in BESTCOMSPlus memory.
INSTALLATION
LSM-2020’s are delivered in sturdy cartons to prevent shipping damage. Upon receipt of a module, check
the part number against the requisition and packing list for agreement. Inspect for damage, and if there is
evidence of such, immediately file a claim with the carrier and notify the Basler Electric regional sales
office, your sales representative, or a sales representative at Basler Electric, Highland, Illinois USA.
If the device is not installed immediately, store it in the original shipping package in a moisture- and dust-
free environment.
Product Registration
Registering with Basler Electric enables you to receive important information updates on your product
plus new product announcements. Register your product by directing your web browser to
www.basler.com
.
Mounting
LSM-2020’s are contained in an encapsulated plastic case and may be mounted in any convenient
position. The construction of a LSM-2020 is durable enough to mount directly on a genset using UNF ¼-
20 or equivalent hardware. Hardware selection should be based on any expected shipping/transportation
and operating conditions. The torque applied to the mounting hardware should not exceed 65 in-lb (7.34
N•m).
See
Figure 8-3 for LSM-2020 overall dimensions. All dimensi
ons are shown in inches with millimeters in
parenthesis.
www . ElectricalPartManuals . com
To Next Page
Loading...
Need help?
General
