9400200990 Rev I DGC-2020 General Information 1-11
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D, or non-hazardous locations
only.
NFPA Compliance
Complies with NFPA Standard 110, Standard for Emergency and Standby Power.
CE Compliance
This product complies with the requirements of the following EC Directives:
• Low Voltage Directive (LVD) - 73/23/EEC as amended by 93/68/EEC
• Electromagnetic Compatibility (EMC) - 89/336/EEC as amended by 92/31/EEC and 93/68/EEC
This product conforms to the following Harmonized Standards:
• EN 50178:1997 - Electronic Equipment for use in Power Installations
• EN 61000-6-4:2001 - Electromagnetic Compatibility (EMC), Generic Standards, Emission Standard
for Industrial Environments
• EN 61000-6-2:2001 - Electromagnetic Compatibility (EMC), Generic Standards, Immunity for
Industrial Environments
Physical
Weight: 2 kg (4.4 lb)
Dimensions: See Section 6, Installation.
WARNING! - EXPLOSION HAZARD
(9400200105 and 9400200106 only)
Substitution of components may impair suitability for Class I, Division 2.
Do not disconnect equipment unless power has been switched off or the area is
known to be non-hazardous.
www . ElectricalPartManuals . com