9400200990 Rev I DGC-2020 BESTCOMSPlus Software 4-3
The BESTCOMSPlus splash screen is shown for a brief time. See Figure 4-3.
Figure 4-3. Splash Screen
The BESTCOMSPlus platform window opens. If a DGC-2020 is connected, select N
ew Connection from
the C
ommunication pull-down menu and select DGC-2020. See Figure 4-4. The DGC-2020 plug-in is
automatically activated after connecting to a DGC-2020.
Figure 4-4. Communication Pull-Down Menu
If a DGC-2020 is not connected, select N
ew from the File pull-down and select DGC-2020.
Activating the DGC-2020 Plug-In
The DGC-2020 plug-in must be activated before it can be used to set up a DGC-2020 product. If the
DGC-2020 plug-in has already been activated, skip to Communication.
Requesting an Activation Key
When initially running the DGC-2020 plug-in, the Activate Device pop-up will appear. You must contact
Basler Electric for an activation key before you can activate the DGC-2020 plug-in. You may request an
activation key through email or the Basler Electric website. Click on either the Website or Email button.
www . ElectricalPartManuals . com
To Next Page
Loading...
