Baumer Description | 3
V2 | OX100 Operating Manual 17
3.3 Interfaces and protocols
The sensor offers a variety of interfaces and protocols (multi-protocol sensor). The available
functions and measuring rates depend on the respectivvely applied protocol.
The sensor supports one client connection per protocol. Read access via the protocols is possi-
ble at any time. Write access is only permissible in the parametrisation mode. Only one inter-
face at a time can be in parametrisation mode.
Sensor parameterization and configuration only via the integrated web interface. Read access
to the measured values and for changing parameter sets is also enabled via the process inter-
faces Modbus RTU and IO-Link.
For the precise range of interfaces and protocols, please see the data sheet that is available for
download at www.baumer.com/OX100.
To Next Page
Loading...
