Baumer Preventive maintenance | 10
V2 | OX100 Operating Manual 65
10 Preventive maintenance
The sensor is maintenance-free. No special preventive maintenance is required. Regular clean-
ing and regular checking of the plug connections are recommended.
10.1 Cleaning the sensor
External cleaning
When cleaning the exterior of the sensor, make sure to use cleaning agents that do not affect
the housing surface and seals.
NOTICE
Material damage due to improper cleaning.
Unsuitable cleaning agents and methods can cause leaks and damage the sensor, the seals or
the connections.
a) Always check the suitability of the cleaning agent for the surface to be cleaned.
b) Use alcohol-based cleaning agents but never any scouring agents, solvents or other ag-
gressive cleaning agents.
c) Never use a high-pressure cleaner for cleaning.
d) Do not scrape off soiling with sharp-edged items.
e) Only use lens cleaning cloths for the front pane of the sensor.
Interior cleaning
No interior cleaning of the sensor is required.
To Next Page
Loading...
