Baumuller b maXX BM3400 Series - Page 121

Monitoring funtions 8.3T
Monitoring function Warning / Error Warning Error Threshold a djustable Reaction adjustable Reaction Setting of limit in parameters Activation by par ameter
Safety relay Safety relay faulty
3)
X X — — — — —
Block monitoring Drive blocked
5)
— X X — PI P1260 —
SH: Quickstop
PI: Pulse inhibit
X: Implemented
—: not possible
1)
only when using the KTY sensor
2)
War ning err or text in WinBASS: Printed circuit board temperature > Threshold value
3)
War ning err or text in WinBASS: Safety relay undervoltage
4)
War ning err or text in WinBASS: PSU-Error 64: Undervoltage U DC link
5)
Pulse inhibit occurs according to the duration, which was set
6)
War ning err or text in WinBASS: Unknown error 79
7)
War ning err or text in WinBASS: Motor error: I
2
t-overload
8)
War ning err or text in WinBASS: Motor warning: I
2
t-threshold exceeded
Instrution Manual b maXX ® BM3400 121
Doument No.: 5.07013.03 from 206