Bernette b79 - Creative Embroidery Functions

Embroidering preparation
115
2019-02 EN 5020079.00A.04
Center the needle to the embroidery hoop
Relocating the embroidery hoop facilitates threading when the needle is close to the embroidery hoop.
đ
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> > Touch the icon «Center the needle to the embroidery hoop» to move the hoop to the center.
> Thread the upper thread.
> Push the button «Start/Stop» to move the hoop back to its previous position.
Embroidery arm return
The embroidery arm can be positioned to store the embroidery module.
đ
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Remove the hoop.
> Touch the icon «Embroidery arm return» the embroidery arm travels horizontally to the left to the park
position.
> Push the button «Start/Stop» to move the embroidery arm to the last position.
Grid on/off
When the center of the hoop and the grid are displayed, the embroidery motif can be positioned more
exactly.
đ
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Touch the icon «Grid on/off» to display the center of the hoop on the display.
> Touch the icon «Grid on/off» again to display the grid.
> Touch the icon «Grid on/off» again so that the center of the hoop and the grid disappear.