Bernette b79 - Presser Foot; Adjusting the Presser Position Via the Knee Lifter of the Free Hand System; Changing the Presser Foot Sole

Sewing preparation
30
2019-02 EN 5020079.00A.04
> Push the slide-on table to the right over the free arm until it engages.
> To remove the slide-on table, pull the slide-on table over the free arm to the left.
2.7 Presser foot
Adjusting the presser position via the knee lifter of the Free Hand System
> Adjust the sitting height so that the knee lifter can be operated with the knee.
> Push the knee lifter with the knee to the right to raise the presser foot.
– Simultaneously the thread tension is released.
> Release the knee lifter slowly to lower the presser foot.
Changing the presser foot sole
Removing the presser foot sole
> Raise the presser foot.
> Press down on the front of the presser foot sole by hand.