Bernette b79 - Using the Foot Control

Sewing preparation
26
2019-02 EN 5020079.00A.04
> Adjust the sitting height so that the knee lifter can be operated with the knee.
Switching the machine on
> Switch on the machine at the main switch to «I».
Fixing the touchscreen pen
> Store the touchscreen pen on the top holder.
Regulating the speed via the foot control
Via the foot control the speed can be adjusted infinitely variable.
> Press the foot control down carefully to start the machine.
> To sew faster, press the foot control harder.
> Release the foot control to stop the machine.