Bernette b79 - Fabric Thickness Measurement; Embroidery Settings; Adjusting the Upper Thread Tension; Adjusting the Maximum Embroidering Speed

Setup Program
47
2019-02 EN 5020079.00A.04
51
> Touch the icon «Position the presser foot» so that the presser foot remains down via the back kick.
> Touch the icon «Position the presser foot» again so that the presser foot remains up via the back kick.
– If only «Position the presser foot »is activated without «Cut thread» and «Securing», the function can
move presser foot to hovering position or highest position (12 mm).
Fabric thickness measurement
While sewing, the machine continuously checks the current fabric thickness and adjusts a proper presser foot
pressure in time to keep a smooth feed of the fabric.
> Touch the icon «Setup Program».
> Touch the icon «Sewing settings».
> To activate the automatic compensation of the presser foot pressure, touch the icon «Fabric thickness
measurement».
> To deactivate the automatic compensation of the presser foot pressure, touch the icon «Fabric thickness
measurement» again.
3.2 Embroidery settings
Adjusting the upper thread tension
Alterations of the upper thread tension in the Setup Program affect all embroidery motifs.
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Alter the upper thread tension».
> Move the slide using the touchscreen pen/finger or touch the icons «+» or «-» to alter the upper thread
tension.
Adjusting the maximum embroidering speed
By using this function, the maximum speed can be reduced.
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
RPM
> Touch the icon «Alter the maximum speed».
> Move the slide using the touchscreen pen/finger or touch the icons «+» or «-» to alter the maximum
speed.