Bernette b79 - Changing the Stitch Length; Correcting the Balance

Creative sewing
60
2019-02 EN 5020079.00A.04
Changing the stitch length
> Turn the «Lower Multifunction knob» to the left to shorten the stitch length.
> Turn the «Lower Multifunction knob» to the right to elongate the stitch length.
> To call up further setting options, touch the icon «Stitch length» (1).
1
Correcting the balance
Different fabrics, threads and stabilizers can affect the programmed stitch patterns so that they cannot be
sewn out correctly. The electronic balance can correct these deviation and the stitch pattern can be adjusted
optimally to the selected fabric.
> Select a stitch pattern or alphabet.
> Touch the icon «i»-Dialog.
> Touch the icon «Balance».
– A preview of the stitch pattern is displayed.
> To correct the lengthwise direction of the stitch pattern, turn «Lower Multifunction knob» down until the
preview of the stitch pattern matches the sewn stitch pattern on the fabric.
> Changed balance settings can be saved for each stitch in «Personal Memory».
> Changed balance settings remain valid only until the «clr button»is pressed or the machine is switched
off.