Bernette b79 - Rotating Motif; Altering the Embroidery Motif Size Proportionally; Mirroring Embroidery Motifs

Creative embroidering
119
2019-02 EN 5020079.00A.04
> Touch the icon «Center of the embroidery motif».
– The embroidery motif is repositioned in the center of the embroidery hoop.
Rotating motif
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Rotate the motif».
> Turn the ««Upper Multifunction knob»» or the «Lower Multifunction knob» to the right or touch the
«+» icon to rotate the embroidery motif clockwise.
> Turn the «Upper Multifunction knob» or the «Lower Multifunction knob» to the left or touch the «-»
icon to rotate the embroidery motif counter-clockwise.
+90
> Touch the icon «Rotate the motif +90°» to rotate the embroidery motif in 90°-steps.
Altering the embroidery motif size proportionally
The alteration is limited to +/- 20%.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Alter the embroidery motif proportionally».
> To increase the size of the embroidery motif proportionally, turn the «Upper Multifunction knob» or the
«Lower Multifunction knob» to the right or touch the icon ««+»».
> To decrease the size of the embroidery motif proportionally, turn the «Upper Multifunction knob» or the
«Lower Multifunction knob» to the left or touch the ««-»» icon .
Mirroring embroidery motifs
Embroidery motifs can be mirror-imaged both vertically and horizontally.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Mirror image left/right» to mirror the embroidery motif vertically.
> Touch the icon «Mirror image up/down» to mirror the embroidery motif horizontally.