Practical stitches
110
6.10 Reinforced darning, automatic
The reinforced Darning Program No. 23 is especially suitable for quick darning of worn or damaged areas.
The reinforced Darning Program No. 23 replaces threads along the lengthwise grain in all materials.
If the Darning Program does not cover the whole worn or damaged area, it is recommended to reposition
the work and the sew the Darning Program again. The length is programmed and can be repeated as
often as desired.
Via the direct entry length, a darning length up to 30 mm can be programmed.
> Attach the Buttonhole foot No. 3A.
> Touch the icon «Practical stitches».
> Select the reinforced Darning Program No. 23.
> Hoop light-weight materials in the round embroidery hoop (optional accessory).
– The darning area stays evenly taut and cannot be distorted.
> Start sewing top left.
> Sew the first row.
> Stop the machine.
> Push the button «Quick reverse».
– The length is programmed.
> Finish sewing the Darning Program.
– The machine stops automatically.
To Next Page
Loading...
