Bernina 790 PLUS - Adding a Single Stitch Pattern; Aligning the Stitch Length and Width

Creative sewing
88
Adding a single stitch pattern
The new stitch pattern is always inserted after the selected stitch pattern.
> Create a stitch pattern combination.
> With the touchscreen pen/finger touch the desired position (1) within the stitch pattern combination to
select a single stitch pattern.
1
> Select a new stitch pattern.
Aligning the stitch length and width
The length and width of all the stitch patterns in a stitch pattern combination can be aligned with the
longest and the widest stitch pattern. Moreover the length and the width of a stitch pattern combination can
be enlarged or reduced proportionally.
> Create a stitch pattern combination.
> Touch the icon «i»-Dialog.
> Touch the icon «Edit the complete combination».
> Touch the icon «Stitch length of the current stitch pattern» (1).
> Touch the icon «Adjust the length within a combination» (2).
1
2
> Touch the icon «Stitch width of the current stitch pattern» (3).