Sewing preparation
35
2 Sewing preparation
2.1 Accessory box
Accessory box free standing
> On the back of the box, pull both extensions out until they click into place.
Storing accessory
NOTICE
Incorrect sorting of the bobbin
The silvery sensor surface can get scratched.
> Make sure that the silvery sensor surfaces are on the right side when sorting the bobbins into the
accessory box.
> Insert the holders (1) for bobbins, feet and needles.
> Store the small parts, e.g. thread discs etc., in the drawers (2) and (3).
> Store the Buttonhole foot with slide No. 3A in compartment (4).
> Store the provided needle package in the special compartment (5).
> Insert the bobbins into the compartment (6) of the accessory box so that the silvery sensor surfaces are
on the right side.
> To remove a bobbin, press the compartment holder down.
> Store the presser feet in the holders (7) (5.5 mm or 9.0 mm).
To Next Page
Loading...
