Bernina 790 PLUS - 13 Embroidering preparation; 13.1 Attaching the Module

Embroidering preparation
156
13.2 Preparing the machine
Lowering the feed dog
> Push the button «Feed dog up/down» to lower the feed dog.
> Attach the stitch plate CutWork/Straight (see page 159).
> Insert the needle (see page 157).
> Attaching the embroidery foot (see page 156).
Selecting the embroidery motif
All BERNINA embroidery motifs can either be embroidered as-is or changed using the various functions
offered by the embroidery machine. All embroidery motifs can be found in the attachment of this instruction
manual. All the stitch patterns contained in the sewing mode can also be embroidered. The stitch patterns
are displayed in files, sorted in Categories, like in the sewing mode. In addition to that, embroidery motifs
from the personal memory or from the BERNINA USB stick (optional accessory) can be loaded.
> Touch the icon «Home».
> Touch the icon «Embroidery mode».
> Select an alphabet, embroidery motif, stitch pattern or a personal embroidery motif from a file.
13.3 Embroidery foot
Attaching the embroidery foot
> Raise the needle.
> Raise the presser foot.
> Switch the machine off and disconnect it from the power supply system.