Bernina 790 PLUS - 11.6 Using the BSR mode

BERNINA Stitch Regulator (BSR)
147
> Cut the thread.
Securing in BSR2 mode
Prerequisite:
• TheBSRpresserfootisattachedandconnectedwiththemachine.
• TheBSRdisplayisopenandtheBSR2modeisactivated.
> Lower the presser foot.
> Push the button «Securing».
> Press the foot control or the button «Start/Stop».
By moving the fabric some short securing stitches are sewn, then the programmed stitch length is activated
and the securing function is deactivated automatically.