Bernina 790 PLUS - Thread-Up Command; Embroidery Hoop; Overview Embroidery Hoop Selection

Embroidering preparation
160
> Select the attached stitch plate (CutWork/Straight, supplied accessory).
Thread-up command
The machine must be ready for embroidery to bring up the bobbin thread.The bobbin thread can be brought
up in one step for a manual knotting. If no securing stitches are wanted, it is recommended to deactivate the
securing stitches in the Setup.
> Hold the upper thread.
> Push the button «Bobbin thread up».
– The bobbin thread is brought up automatically.
13.5 Embroidery hoop
Overview embroidery hoop selection
1
1 Hoop selection
Selecting the embroidery hoop
The best embroidery result is achieved when the smallest possible embroidery hoop for the embroidery motif
is selected.
The embroidery motif has a pre-set size which is displayed.
Prerequisite:
• Theembroiderymotifisselected.