Bernina 790 PLUS - Sewing Eyelets

Buttonholes
139
Prerequisite:
• TheDarningfootNo.9(optionalaccessory)ortheButtonsew-onfootNo.18(optionalaccessory)is
attached.
> Touch the icon «Buttonholes».
> Lower the feed dog.
> Select the Button sew-on Program No. 60.
> Place the button on the sewing project.
> Turn the handwheel to adjust the distance between the holes.
> Hold the threads when starting to sew and, if necessary, alter the stitch width.
– The machine sews the Button sew-on Program and stops automatically.
> Pull on both bobbin threads until the ends of the upper threads are visible on the wrong side.
> Knot the ends manually.
9.17 Sewing eyelets
For increased stability sew the eyelet twice.
Prerequisite:
• TheReversepatternfootNo.1CortheOpenembroideryfootNo.20Cisattached.
> Touch the icon «Buttonholes».
> Select the Eyelet Program No. 61 or No. 62.
> Turn the «Upper Multifunctional knob» or the «Lower Multifunctional knob» to alter the size of the
eyelet.
> Sew the Eyelet Program.
– The machine stops automatically at the end of the Eyelet Program.
> Use an awl, punch pliers or a hole punch to open the eyelet.