Bernina 790 PLUS - 9.12 Sewing the manual 7-step buttonhole

Buttonholes
137
> Touch the icon «Scroll down» so that the last icon appears.
> Touch the icon.
– The machine secures and stops automatically.
9.13 Sewing the manual 5-step buttonhole
The length of the beads is manually determinded when sewing. Bartack, eye and securing stitches are
preprogrammed. The individual steps can also be selected by scrolling, by using the arrow icons, by direct
selection or by touching the button «Quick reverse».
Prerequisite:
• TheButtonholefootNo.3C(optionalaccessory)isattached.
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 54.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjust the length manually».
– Icon (1) in the display is activated for the buttonhole start.
> Sew the desired buttonhole length.
– Icon (2) is activated.
> Stop sewing at the desired length of the bead or at the marking.
> Touch the icon (3).
– The machine sews the eye or the keyhole and stops automatically.
> Touch the icon (4).
– The machine sews the second bead in reverse. Stop the machine at the first stitch at the buttonhole
start.
> Touch the icon (5).
2
3
4
5
1
– The machine sews the upper bartack and secures automatically.
man