Bernina 790 PLUS - Edgestitching Using the Seam Guide; Sewing Hem Edges

Practical stitches
113
> Select the needle position in the desired distance to the edge.
5/8
5/85/8
25 15 15
15
75
75
6.16 Edgestitching using the seam guide
When sewing parallel wider lines, it is recommended to guide the seam guide along the sewn of lines.
> Attach the Reverse pattern foot No. 1C or the Edge stitch foot No. 10/10C/10D (optional accessory).
> Touch the icon «Practical stitches».
– The Straight stitch No. 1 is selected automatically.
> Loosen the screw on the back of the presser foot.
> Insert the seam guide into the hole of the presser foot.
> Adjust the width as desired.
> Tighten the screw.
> Guide the folded edge along the seam guide.
5/8
5/85/8
1
25 15 15
15
75
75
6.17 Sewing hem edges
When using the Blindstitch foot No. 5, it is recommended to select a needle position far left or far right.
When using the Reverse pattern foot No. 1C or the Edge stitch foot No. 10/10C/10D all needle positions are
possible.
> Attach the Blindstitch foot No. 5 or the Reverse pattern foot No. 1C or the Edge stitch foot
No. 10/10C/10D (optional accessory).
> Touch the icon «Practical stitches».
– The Straight stitch No. 1 is selected automatically.
> Place the inside upper edge right against the guide of the Blindstitch foot.