Bernina 790 PLUS - 13 Embroidering Preparation; Attaching the Module

Embroidering preparation
155
13 Embroidering preparation
13.1 Attaching the Module
NOTICE
Transporting the embroidery module
Damage to the embroidery module connection and machine.
> Remove the embroidery module before transporting the machine.
Prerequisite:
• Theslide-ontablemustnotbeattached.
> Make sure that the module and the machine are placed on a stable, even surface.
> Make sure that there is enough space around to allow the unimpeded movement of the embroidery arm.
> Lift the embroidery module on the left.
> Carefully push the module from left to right into the embroidery module connection (1) of the machine.
1
1
> To remove, lift the embroidery module on the left and carefully pull to the left.