Contents
6
2.6 Feed dog 41
Adjusting the feed dog 41
2.7
Slide-on table 42
Using the slide-on table 42
Attaching the seam guide 42
2.8
Presser foot 43
Adjusting the presser position via the knee lifter of the Free Hand System 43
Adjusting the presser foot position via the button «Presser foot up/down» 43
Changing the presser foot 43
Selecting the presser foot in the user interface 43
Adjusting the presser foot pressure 44
2.9
Adjusting the feed dog 44
2.10
Needle and stitch plate 45
Changing the needle 45
Selecting the needle in the User Interface 45
Selecting needle type and needle size 45
Adjusting the needle position up/down 46
Adjusting the needle position left/right 46
Needle stop up/down (permanent) 46
Changing the stitch plate 47
Selecting the stitch plate in the User Interface 47
2.11
Threading 47
Threading the upper thread 47
Threading the double needle 50
Threading the triple needle 51
Winding the bobbin thread 51
Threading the bobbin thread 52
Indicating fill level of bobbin thread 55
3
Setup Program 56
3.1
Sewing settings 56
Adjusting the upper thread tension 56
Adjusting the maximum sewing speed 56
Programming the securing stitches 56
Adjusting the hovering height of the presser foot 57
Programming the button «Pattern end» 57
Programming the button «Thread cutter» 58
Adjusting the presser foot position with needle stop down 58
Programming the button «Quick reverse» 59
Programming the button «Securing» 59
Programming the foot control 60
3.2
Embroidery settings 60
Adjusting the upper thread tension 60
Adjusting the maximum embroidering speed 61
Centering or opening embroidery motifs in the original position 61
Calibrating the embroidery hoop 61
Entering the fabric thickness 62
Function thread removal on/off 62
Programming the securing stitches 63
Adjusting the thread cut 63
To Next Page
Loading...
