BERTHOLD TECHNOLOGIES LB4710-080 - Page 193

Chapter 3 Parameters
Mini-Switch LB 471
48
Revision log
Query revision log
(Only in the professional mode)
The last 26 parameter modifications
are stored in the revision log.
Push the Enter button to invoke the
function.
Push the buttons:
 / to invoke the data position
within a parameter modification.
 / to invoke the 26 stored
parameter modifications using its
position number.
 Push Clear to exit the revision log.
Data position within a parameter modification
0
1
2
3
4
5
6
7
Changed
code
Old
value
New
value
Minute
Hour
Day
Month
Year
Position number
01
12
02
10
50
15
04
10
03
02
.
.
.
26
Example: In the table above, a parameter modification has been
entered under error position number „01“ with the following data:
 Code 12 (time constant) has been increased from 2s to 10s
 Date of revision: 04.10.2003 15:50h
If all 26 positions are occupied by modifications and an additional
modification occurs, then the oldest modification will be overwritten.
Note: The position number is not displayed in data position 1 and
2, because these positions are needed for 3- or 4-digit values.
C o d e 7 1
Table 6:
Revision log
C 1 70
01.06
Position
number
Data position
Value