NOTES
The information contained in this paragraph is designed
to prevent damage to the vehicle.
• Thoroughly clean the vehicle before removing parts.
• After removing parts, clean them and place them in containers
taking care to observe the order of removal.
• Always use special tools whenever necessary or directed.
• Always use glues, sealants and lubricants as directed, ob-
serving the indications about their specifications.
• Always replace parts such as gaskets, O-rings and safety
washers with new ones.
• When loosening or tightening nuts or screws, always start
from the bigger ones, or from the centre. Always observe the
prescribed tightening torques.
• Only use genuine Betamotor spares.
TABLES OF CONTENTS
TABLE OF CONTENTS OF EACH CHAPTER
12
Workshop manual RR 4T - 400 - 450 - 525
CONTENTS OF EACH CHAPTER
To Next Page
Loading...
Need help?
General
