Beta RR 4T-400 User Manual

25
6 - Engine Release 01 Date 09/2007
Removing the countershaft and the crankshaft
– Turn the crankshaft until the marks on the countershaft and
the crankshaft are aligned.
– In this position the crankshaft can be removed from its seat.
– Remove the crankshaft.
– Clean all the parts, check them for wear and replace as nec-
essary.
NOTE: When the engine is overhauled, it is advisable to
replace all gaskets, oil seals, O-rings and bearings.
64_Inghilterra_059311 27-12-2007 18:22 Pagina 25

Beta RR 4T-400 Specifications

General

Brand	Beta
Model	RR 4T-400
Category	Motorcycle
Language	English