Filling the battery
– Remove the battery and the electrolyte container from the
package.
Before starting to fill the battery, read through the enclosed in-
struction slip.
– Open the electrolyte container.
– Insert the electrolyte container in the battery filler openings
and push it down hard.
– When all container compartments are empty, remove the con-
tainer from the battery.
– Carefully close the filler openings with the cover.
NOTE: After filling the battery, allow it to rest for at least half an
hour without charging it.
IMPORTANT: WHEN FILLING A NEW BATTERY, BE SURE TO
FOLLOW THE DIRECTIONS PROVIDED IN THE ENCLOSED
INSTRUCTION SLIP, WHICH ALSO PROVIDES THE SAFETY
RULES TO BE FOLLOWED. FAILURE TO OBSERVE THESE
RULES MAY LEAD TO SERIOUS PERSONAL INJURY.
10
Workshop manual RR 4T - 400 - 450 - 525
To Next Page
Loading...
Need help?
General
