Beta RR 4T-400 - Page 160

10
Workshop manual RR 4T - 400 - 450 - 525
30
32
– Push rod 32 towards the inside of case 30 to allow the pump
assembly to be removed from below.
NOTE: The pump can be completely overhauled and adjusted.
– Check ring 35 for wear.
35
12
Separating the fork leg from the leg holder and removing the
seal rings
– Using a small flat blade screwdriver, remove wiper seal 12.
– Using the same screwdriver, remove metal retaining ring 11.
11
08_Inghilterra_059311 27-12-2007 18:49 Pagina 10