BIO RAD CFX96 User Manual

CFX96 and CFX384 Systems Manual
77
2. Choose Exclude Well XX from Analysis from the menu options.
Figure 77. Right-click to exclude a well from analysis.
NOTE: Unselect the Exclude Well from Analysis from the right-click menu to
reinclude the well.
PLATE EDITOR OPTIONS
1. Click the View/Edit Plate button on the toolbar in the Data Analysis window.
2. Select one or more wells in the well selector view.
3. Click Exclude Wells in Analysis (Figure 78) to exclude the selected wells. This checkbox
is at the bottom of the Plate Editor controls on the right side of the window.
Figure 78. Exclude Wells in Analysis checkbox at bottom of the pane.

BIO RAD CFX96 Specifications

General

Temperature Uniformity	±0.4 °C
Software	CFX Maestro Software
Detection Method	Real-time PCR (qPCR)
Sample Capacity	96-well plate
Excitation Source	LED
Ramp Rate	Up to 5°C/sec
Heating Rate	5°C/sec
Sensitivity	Single copy detection
Power Requirements	100-240 V, 50/60 Hz
Temperature Range	0–100 °C