BK Precision XLN3640 - Page 121

25
XLN15010 – 0.01 – 1 V/ms
XLN30052 – 0.01 – 3.3 V/ms
XLN60026 – 0.01 – 6.6 V/ms
CURR SLEW RATE:
Current ascending/descending slope
XLN15010 – 0.001 – 0.104 A/ms
XLN30052 – 0.001 – 0.052 A/ms
XLN60026 – 0.001 – 0.026 A/ms
3. P
ROTECTION SETTING (PROTECTION)
Press key in the first screen of the menu to enter PROTECTION
menu.
OVP: Enables/disables
overvoltage protection
SET: Set up the overvoltage
protection point.
OCP: Enables/disables
overcurrent protection
SET: Set up the overcurrent protection
point.
OPP: Enables/disables overpower
protection
SET: Set up the overpower protection
point.
CV TO CC:
Enables/disables the protection of the change
from CV to CC mode
CC TO CV:
Enables/disables the protection of the change
FF
FF
=
=
OVP = OFF SET = 306.00 V
OCP = OFF SET = 5.3040 A
OPP = OFF SET = 1560.00 W