40
A MODE:
This allows the output On/Off button to be enabled or disabled.
When pin 1 and 14 are opened, the output On/Off button is disabled and
the power supply’s output will remain OFF. Pressing the On/Off button
will not turn ON the output, and the LCD screen will also display ENA .
V = 300.00 V I = 1.000 A OFF
ENA
0.00 V 0.000 A
When pin 1 and 14 are shorted, the output On/Off button is enabled.
This will enable the output On/Off button to allow front panel control of
the output state. If the display ENA is on the LCD screen, press ESC
once so that it disappears before attempting to press the output On/Off
button.
B MODE:
This allows enabling or disabling the power supply’s output using the
analog interface pins 1 and 14. It will also disable the output On/Off
button.
W
hen pin 1 and 14 are opened, the output will be OFF.
W
hen pin 1 and 14 are shorted, the output will be ON.