52
COC? Returns the OCP setting level
COCP Sets the OCP on/off
COCP? Returns the OCP on/off
COP Sets the OPP level
COP? Returns the OPP setting level
COPP Sets the OPP on/off
COPP? Returns the OPP on/off
CMODE? Returns the power supply operation mode
==================================================
SYNCHRONOUS CONTROL COMMAND:
Command Description
==================================================
GRST Reset command. Brings the power supply to a
known state
GCLS Clear status
GCLR Clear protect
GPV Sets the output voltage value in Volts
GPC Sets the output current value in Amperes
GOUT Turns the output to ON or OFF
GOV Sets the OVP level
GOVP Sets the OVP on/off
GOC Sets the OCP level
GOCP Sets the OCP on/off
GOP Sets the OPP level
GOPP Sets the OPP on/off
==================================================
EXAMPLES:
Q1. How to read back ID for Address 5 on the system?
CADR 5 OK
CIDN? B&K Precision. XLN 3640,A1234567,1.15,0
Q2. How to set up Voltage for Address 7 on the system?
To Next Page
Loading...
Need help?
General
