132
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
Port Shaper Unit: Controls the unit of measure for the port shaper rate as “kbps” or “Mbps.” The default value is “kbps.”
Buttons:
- Apply – Click to save changes.
- Reset - Click to undo any changes made locally and revert to previously saved values.
3.18.4 PORT SHAPING
This section provides an overview of QoS Egress Port Shapers for all switch ports. Otherwise, the user can get all detailed
information to the ports belonging to the currently selected stack unit, as reflected by the page header.
WEB INTERFACE
To display the QoS Port Shapers in the web interface:
1. Click Configuration, QoS, Port Shapers.
2. Display the QoS Egress Port Shapers.
FIGURE 3-81. QOS EGRESS PORT SHAPERS SCREEN
Click the Port index to set the QoS Egress Port
Shapers
CHAPTER 3: SYSTEM CONFIGURATION
To Next Page
Loading...
