27
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 3: SYSTEM CONFIGURATION
Parameter description:
IP Range: Define the IP range to be excluded IP addresses. The first excluded IP must be smaller than or equal to the second excluded
IP. But, if the IP range contains only 1 excluded IP, then you can just input it to either one of the first and second excluded IP fields or
both.
Buttons:
- Add IP Range - Click to add a new excluded IP range.
- Apply – Click to save changes.
- Reset - Click to undo any changes made locally and revert to previously saved values.
3.4.1.3 P O OL
This page manages DHCP pools. According to the DHCP pool, a DHCP server will allocate IP addresses and deliver configuration
parameters to DHCP client.
WEB INTERFACE
To configure a DHCP server pool in the web interface:
1. Click Configuration, DHCP, Server, Pool.
2. Click Add New Pool then you can create a new Pool on the switch.
3. Click Apply.
FIGURE 3-12. DHCP SERVER POOL SCREEN
To Next Page
Loading...
