69
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 3: SYSTEM CONFIGURATION
Buttons:
- Apply – Click to save changes.
- Reset- Click to undo any changes made locally and revert to previously saved values.
3.5.2.5 ARP INSPECTION
The section describes how to configure the ARP Inspection parameters of the switch. You can use the ARP Inspection configure to manage
the ARP table.
CONFIGURATION
This section describes how to configure ARP Inspection settings.
Mode (Enabled and Disabled)
Port (Enabled and Disabled)
WEB INTERFACE
To configure an ARP Inspection Configuration in the web interface:
1. Select “Enabled” in the ARP Inspection Configuration Mode.
2. Select “Enabled” for the specific port in the Port Mode Configuration.
3. Click Apply.
FIGURE 3-40. ARP INSPECTION CONFIGURATION SCREEN
To Next Page
Loading...
