47
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 3: SYSTEM CONFIGURATION
Syslog: Enable - Select this Group Name in Syslog.
Trap: Enable - Select this Group Name in Trap.
SMTP: Enable - Select this Group Name in SMTP.
3.5.1.8 RMON
An RMON implementation typically operates in a client/server model. Monitoring devices contain RMON software agents that collect
information and analyze packets. These probes act as servers and the Network Management applications that communicate with
them act as clients.
STATISTICS
Configure the RMON Statistics table on this page. The entry index key is ID.
WEB INTERFACE
To display the configure RMON configuration in the web interface:
1. Click RMON, Statistics.
2. Click Add New Entry.
3. Specify the ID parameters.
4. Click Apply.
FIGURE 3-29. RMON Statics Configuration screen
Parameter description:
These parameters are displayed on the RMON Statistics Configuration page:
Delete: Check to delete the entry. It will be deleted during the next save.
ID: Indicates the index of the entry. The range is from 1 to 65535.
Data Source: Indicates the port ID which wants to be monitored. If in stacking switch, the value must add 1000*(switch ID-1), for
example, if the port is switch 3 port 5, the value is 2005
To Next Page
Loading...
