Black Box LGB1126A-R2 - MLD Snooping; Status

211
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 4: MONITOR
 Buttons:
- Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
- Refresh: Click to refresh the page.
|<<: Updates the system log entries to the first available entry ID
>>: Updates the system log entry to the next available entry ID
4.10.2 MLD SNOOPING
4.10.2.1 S TAT U S
The section describes how to complete the MLD Snooping and display the MLD Snooping Status and detailed information. It will help
you to find out the detailed information of MLD Snooping status.
WEB INTERFACE
To display the MLD Snooping Status in the web interface:
1. Click Monitor, MLD Snooping, Status
2. To auto-refresh the information, click Auto-refresh.
3. Click “ Refresh“ to refresh an entry of the MLD Snooping Status Information.
4. Click “ Clear“ to clear the MLD Snooping Status.
FIGURE 4-46. MLD SNOOPING STATUS SCREEN
Parameter description:
 VLAN ID: The VLAN ID of the entry.
 Querier Version: Working Querier Version currently.
 Host Version: Working Host Version currently.