93
Step 2 Under Calling/Paging, select All Call.
Step 3 If you must enter a password to complete this task,
select Dial Pad and enter the 4-digit password.
Step 4 If prompted, enter 1 for confirmation.
Step 5 If prompted, allow C4000 to use the microphone asso-
ciated with your station.
Warning If you turn off the microphone on your computer,
then you cannot launch audio distribution, tones,
alarms, and so on. When attempting to making a call
with the computer’s microphone turned off, C4000
automatically hangs up the call. If you make a second
call, the dashboard displays a message that the
phone is in use
. Also, when the microphone is off and
a bell tone comes in, C4000 rings as opposed to auto
answering.
Step 6 After you hear the tone, speak into the microphone.
Step 7 Select End Call to end the page.
Figure 5-19, All Call
To Next Page
Loading...
Need help?
General