Bogen Nyquist C4000 Series User Manual

107
6.2 Configuring Check-In
To use the check-in process, the user must have appropriate permis-
sions assigned.
To configure check-in options:
Step 1 If not already on your dashboard, select Dashboard
from the navigation bar.
Step 2 Under Calling/Paging, select Manage Check-In.
Step 3 On the Manage Check-In page, select Configure.
Step 4 Complete the configuration options.
Step 5 Select Save.
Figure 6-5, Configure Check-in

Bogen Nyquist C4000 Series Specifications

General

Brand	Bogen
Model	Nyquist C4000 Series
Category	Conference System
Language	English