74
Table 4-5, Edit Tone Page Parameters
Name Displays the name for this tone.
Note: This parameter cannot be changed for default sys-
tem Tones.
Note: Valid characters include uppercase letters (A-Z), low-
ercase letters (a-z), numerals (0-9), space, and the follow-
ing special characters: !@$*?-.,.
Type Use the drop-down menu to select if the tone is Normal or
Alarm.
Hide Specifies if the tone is to be hidden from the dashboard
view.
Times to Play Displays the number of times the tone will play. Parame-
ters are 0 through 10.
Note: A setting of 0 results in the tone playing continuously
until it is manually stopped via the dashboard. This param-
eter does not appear for Line Input tones.
Time Between Repeats
(second)
Displays the time in seconds between replaying of the
tone. You can select between 0.5 to 5 in 0.5 increments.
Note: This parameter does not appear for Line Input tones.
DTMF Code Provides the DTMF code used with manual dial pad
announcement or tone activation.
Length Provides the length of the tone.
Note: This parameter cannot be changed except for Line
Input tones.
File Upload Select Choose File, navigate to the audio file, and then
select the file if you want to choose a new file.
Note: This parameter only appears for user-provided tones
but not for Line Input tones.
To Next Page
Loading...
Need help?
General