Bogen Nyquist C4000 Series - Managing Calls; Placing Call Using Directory; Figure 5-2, Directory Button

78
5.1 Managing Calls
C4000 provides two ways to place a call via the dashboard:
• Through the use of a directory
• Through the use of a dial pad
5.1.1 Placing Call Using Directory
The C4000 directory is a list of all stations that can receive calls. These
can include computers with the Admin Web UI, computers with the
Web UI, telephones, VoIP speakers, or digital call switches and speak-
ers.
To place a call using the directory:
Step 1 If not already on your dashboard, select Dashboard
from the navigation bar.
Step 2 Under Calling/Paging, select Directory.
Note: Placing intercom calls requires an Intercom License.
Figure 5-2, Directory Button