54
3.5 Viewing Announcements
Through the Announcements page, you can view a list of all
announcements that are available for scheduling, delete an
announcement, and select to edit or add an announcement.
To view a list of all announcements that are available for scheduling:
Step 1 On the navigation bar, expand Audio.
Step 2 Select Announcements.
The following parameters appear for each announcement file:
Note: The navigation bar does not appear if you are not authorized
to make changes to the C4000 configuration. Contact your system
administrator or refer to the Nyquist C4000 System Administrator
Manual.
Figure 3-5, Announcements Page
Table 3-3, Announcements Page Parameters
Name Displays the user provided name of the announcement file.
Note: Valid characters include uppercase letters (A-Z), low-
ercase letters (a-z), numerals (0-9), space, and the following
special characters: !@$*?-.,.
Type Displays if the announcement is a Normal or an Emer-
gency announcement.
DTMF Code Displays the DTMF code used with manual dial pad
announcement or tone activation.
To Next Page
Loading...