61
Step 3 On the Alarm page, select the alarm that you want to
sound.
Step 4 If you must enter a password to complete this task,
select Dial Pad and enter the 4-digit password.
Step 5 If prompted, enter 1 for confirmation.
Step 6 To end the alarm, select Stop.
4.2 Starting and Stopping Tones
Tones are similar to alarms, but are usually used to signal an
announcement or a time-based event. Launching a tone, sends a
tone to all zones with a Type of Time or a combination of Time and
Paging, Audio, or both.
Figure 4-3, Alarm Page With Stop Option
To Next Page
Loading...
Need help?
General