Bogen Nyquist C4000 Series - Figure 2-21, Adding Scheduled Audio

38
Step 3 To end the playing of audio, select the Stop icon next
to the playlist.
To automatically schedule audio as part of an event, follow the steps
for creating an event, ensuring that you set the Scheduled Audio for
the playlist, Matrix Mixer Pre-Amp channel, or amplifier to be used
for this event. For information about creating an event, refer to the
Nyquist C4000 System Administrator Manual.
You can also select to stop the Scheduled Audio by selecting Stop
Playlist or Stop Line-Input.
Figure 2-21, Adding Scheduled Audio