55
3.6 Editing Announcements
From the Edit Announcement page, you can edit an audio file’s
parameters such as times to play.
Creation Date/Time Displays when the announcement was created.
Created By Displays the extension that is to be considered the source
of the announcement for CoS considerations.
Times to Play Displays the number of times the announcement will play.
This number can range from 0 through 10.
Note: A setting of 0 results in the announcement playing
continuously until it is manually stopped via the dashboard.
Times Between
Repeats (seconds)
Displays the time in seconds before replaying the
announcement.
Play to Zone Displays either All Speakers or a specific zone for this
announcement to play.
Note: If the Type for the station is set to Admin Web Inter-
face, Admin Phone, IP Phone, Analog Phone, or Mobile
Device and an Announcement Zone was set for the sta-
tion, the Announcement Zone overrides the Play to Zone.
Description Provides a description of the announcement.
Note: Valid characters include uppercase letters (A-Z), low-
ercase letters (a-z), numerals (0-9), space, and the following
special characters: !@$*?-.,.
Playback Allows you to manually play the announcement. Selecting
the Menu icon and then the down arrow in this field also
allows you to download and save the announcement.
Table 3-3, Announcements Page Parameters (Continued)
Note: The navigation bar does not appear if you are not authorized
to make changes to the C4000 configuration. Contact your system
administrator or refer to the Nyquist C4000 System Administrator
Manual.