68
4.4.1 Generating Tones
Generating a one frequency tone is another way add a tone if you do
not want to use the default tones and do not have a way to upload a
tone from a network or removable media location.
Table 4-2, Add Tone Page Parameters (Upload)
Name Provide a name for this tone.
Note: Valid characters include uppercase letters (A-Z), low-
ercase letters (a-z), numerals (0-9), space, and the following
special characters: !@$*?-.,.
Type Use the drop-down menu to select if the tone is Normal or
Alarm.
Hide Specify if the tone is to be hidden or displayed on the dash-
board view.
Times to Play Select the number of times the tone will play. Parameters
are 0 through 10.
Note: A setting of 0 results in the tone playing continuously
until it is manually stopped via the dashboard.
Time Between Repeats
(Seconds)
Select the time in seconds between replaying of the tone.
You can select between 0.5 to 5 in 0.5 increments.
DTMF Code Provide the DTMF code used with manual dial pad
announcement or tone activation.
File Upload Select Choose File, navigate to the audio file, and then
select the file.
Note: The navigation bar does not appear if you are not authorized
to make changes to the C4000 configuration. Contact your system
administrator or refer to the Nyquist C4000 System Administrator
Manual.
To Next Page
Loading...
Need help?
General