66
4.4 Uploading Tones
C4000 provides three ways of adding a tone:
• Uploading a file that has been copied to a location on your net-
work, local computer, or to removable media, such as a Flash
drive, that you have access to
• Generating a one frequency tone that can be saved (See "Generat-
ing Tones” on page 68.)
• Selecting a two-channel or four-channel audio power amplifier or
MMPA and the input channel to generate a tone
In each scenario, you are adding a tone to your C4000 system that
can be used later via either a schedule or manual tone activation.
Times to Play Displays the number of times the tone plays. Parameters
are 0 to 10.
Note: A setting of 0 results in the tone playing continuously
until it is manually stopped via the dashboard.
Time Between Repeats
(seconds)
Displays the time in seconds before the tone is replayed.
You can select between 0.5 to 5 in 0.5 increments.
Playback Allows you to manually play the tone. Selecting the Menu
icon in this field also allows you to download and save the
announcement.
Table 4-1, Tones Page Parameters (Continued)
Note: The navigation bar does not appear if you are not authorized
to make changes to the C4000 configuration. Contact your system
administrator or refer to the Nyquist C4000 System Administrator
Manual.
To Next Page
Loading...
Need help?
General